Internet Info 1994 March/Internet Info CD-ROM (Walnut Creek) (March 1994).iso/networking/terms/kermit/c/cn8ipr.a86

Text File | 1988-08-16 | 41.9 KB | 1,443 lines

; CN8IPR.A86
; * * * * * * * * * * * * * * * * version 3.0 * * ** * * * * * * * * * * * *
; Allows packet echo for ICL VME systems - CGL
; * * * * * * * * * * * * * * *  version 2.9  * * * * * * * * * * * * * * *
; [34c] Add sorted wildcard SENDs with initial filename
; * * * * * * * * * * * * * * *  version 2.7  * * * * * * * * * * * * * * *
; [31] Fix display on file renaming.
; RonB, 05/05/84
; [30c] Isolate ANSI escape sequences for machine independence.
; [29g]  Add 8th bit quoting.
; [29d]  Enlarge receive buffer and check for packet overruns.
; [29b]  Add TAKE processing (close command file when aborting).
; [29a]  Send error packet when aborting.
; RonB, 04/08/84
; * * * * * * * * * * * * * * *  version 2.6  * * * * * * * * * * * * * * *
; [28b]  Make file-not-found error more informative (include filename).
; [28a]  Clear attribute bits from filename before sending
; RonB, 03/27/84
; [25] - make KERCMD more modular by eliminating some use of text
; strings by other modules (KERPRO, KERSYS), and moving some
; parsing into KERCMD (ESCAPE and EOLSET logic in KERSYS)
; * * * * * * * * * * * * * * *  version 2.4  * * * * * * * * * * * * * * *
;  [21a] Add timeout enable/disable
; RonB,03/05/84
;  [20a] Fix version & send/receive header
;  [20e] Clean up environment better before rebooting in KABORT
; RonB,03/02/84
;  [19f] Add ^X/^Z file interruption - adapted from PC Kermit V1.20
;  Put in Help line for above.
;  [19g] Put in timeouts.
; R. Garland 2/84
; * * * * * * * * * * * * * * *  version 2.1  * * * * * * * * * * * * * * *
;  [14] Fix nout to print decimal.
; RonB,12/28/83
;  [13] Use control-Z's for filler in partial sectors instead of nulls.
; RonB,12/27/83
;  [12] Allow user abort from the keyboard in the send and receive routines.
; RonB,12/27/83
;  [9] Fix filename parsing, and add wildcard ability.
; RonB,12/26/83
; * * * * * * * * * * * * * * *  version 2.0  * * * * * * * * * * * * * * *
; This module contains the routines that actually implement the Kermit
; protocol.

; Packet definitions.

maxpkt equ '~'-' '+2O ;Maximum size of a packet.
maxtry equ 05O  ;Default number of retries on a packet.
imxtry equ 20O  ;Default number of retries send initiate.
drpsiz equ 5EH  ;Default receive packet size.
dspsiz equ 20H  ;Default send packet size.
dstime equ 0AH  ;Default send time out interval.
drtime equ 05H  ;Default receive time out interval.
dspad equ 00H  ;Default send padding.
drpad equ 00H  ;Default receive padding.
dspadc equ 00H  ;Default send padding char.
drpadc equ 00H  ;Default receive padding char.
dseol equ cr  ;Default send EOL char.
dreol equ cr  ;Default receive EOL char.
dsquot equ '#'  ;Default send quote char.
drquot equ '#'  ;Default receive quote char.
dqbin equ '&'  ;Default 8th-bit quote char. ;[29g]

bufsiz equ 80H  ;Size of DMA.

; A few control characters

ctlc equ 03H  ;[19f]
ctlx equ 18H  ;[19f]
ctlz equ 1AH  ;[19f]

 DSEG $

; Program storage.

belflg db 1  ;Use bell.
incmod db 0  ;Insert Character mode.
hierr db 0  ;Non-ascii char (non-zero if yes).
parflg db defpar  ;Parity flag (default none.)
flwflg db 0  ;File warning flag (default off).
ibmflg db 0  ;IBM flag (default off).
vmeflg db 0  ;VME flag (default off);
incnt dw 0  ;Number of chars read in from port.
pktptr dw 0  ;Position in receive packet.
spsiz db dspsiz  ;Send packet size.
rpsiz db drpsiz  ;Receive packet size.
stime db dstime  ;Send time out.
rtime db drtime  ;Receive time out.
spad db dspad  ;Send padding.
rpad db drpad  ;Receive padding.
spadch db dspadc  ;Send padding char.
rpadch db drpadc  ;Receive padding char.
seol db dseol  ;Send EOL char.
reol db dreol  ;Receive EOL char.
squote db dsquot  ;Send quote char.
rquote db drquot  ;Receive quote char.
ebquot db 'Y'  ;Send 8th-bit quote char.  ;[29g]
pktnum dw 0  ;Packet number.
numpkt dw 0  ;Total number of packets sent.
numrtr dw 0  ;Total number of retries.
numtry db 0  ;Number of tries on this packet.
oldtry db 0  ;Number of tries on previous packet.
cxzflg db 0  ;[19f] flag for ^X/^Z file interruption
state db 0  ;Present state of the automaton.
packet rb 4  ;Packet (data is part of it).
data rb 60H  ;Data and checksum field of packet. ;[29d]
recpkt rb 100H  ;Receive packet storage.  ;[29d]
temp dw 0
argblk dw 0  ;For subroutine arguments.
argbk1 dw 0
argbk2 dw 0
argbk3 dw 0
tickst dw 10*(7470/clckrt);[19g] "magic" formula for loops/tick
    ;[19g] CLCKRT is the system clock rate ...
    ;[19g] ... defined in KERIO
ticklp dw 0  ;[19g] Dynamic loop count for tick
tickct db dstime  ;[19g] # ticks for timeout to occur
tmodon db 0  ;[19g] flag for time-out message

 CSEG $

; Check for a user abort or interrupt during the send or receive ;[12] begin
;   modified by Rg.
kabort:
 call dbinst  ;Check if a char has been typed.
  jmp r  ;[19f]  Merrily return.
 call dbin  ;Get the character.
 cmp al, ctlc ;Abort if control-C [19f]
 je kabrt2
 cmp al, ctlx ;[19f] Is it control-x ?
 je kabrta  ;[19f] yes
 cmp al, ctlz ;[19f] control-z ?
 jne kabrtb  ;[19f] no
kabrta: add al, 100O ;[19f] make into 'X' or 'Z'
 mov cxzflg, al ;[19f] set the flag
 call intmsg  ;[19f] reassure the user
 ret   ;[19f] return
kabrtb: cmp al, cr  ;if <cr> do a timeout  ;[29a] begin
 jne kabrtc
 pop bx  ;return of kabort
 pop bx  ;receive packet pointer
    ;... next is return of inpkt
 ret   ;return to timeout routine ;[29a] end
kabrtc: cmp al, escchr ;or the escape character followed by 'C'.
 jne kabrt9
 mov cx, 1000 ;Only wait just so long for the next char.
kabrt1: push cx
 call dbin
 pop cx
 cmp al, 0
 loope kabrt1
 cmp al, ctlc ;Control-C also works here. [19f]
 je kabrt2
 and al, 137O ;Capitalize it.
 cmp al, 'C'  ;If not a 'C' then continue.
 jne kabrt9
kabrt2: cmp tkflg, 0 ;Close any command file in use ;[29b] begin
 je kabrt3
 call tkcls      ;[29b] end
kabrt3: call binst  ;Clear out extraneous input ;[29a] begin
  jmp kabrt4 ;If none, go abort this transmission.
 call bin
 jmps kabrt2
kabrt4: pop bx  ;return from kabort
 pop bx  ;receive packet pointer
 pop bx  ;return from inpkt
 pop bx  ;return from rpack
    ;... next is return from r??? to read
 mov dx, offset erms21 ;Print '* aborted *' message.
 jmp fatal      ;[29a] end
kabrt9: mov dl, bell ;beep    [19f]
 call dbout  ;    [19f]
 ret   ;return no error  [19f]


; Send the generic finish command to the remote Kermit.

finsen: mov ah, 'F'  ;Ask for the finish command.
 call gensen
 ret


; Send the generic logout command to the remote Kermit.

byesen: mov ah, 'L'  ;Ask for the logout command.
 call gensen
 ret


; This procedure processes all the generic single packet sends.

gensen: mov temp, ax ;Save the specific generic command.
 mov numtry, 0 ;Initialize count.
 call cfibf  ;Clear out input buffer of extra NAKs.
fins1: mov ah, numtry
 cmp ah, maxtry ;Too many times?
 js fins3  ;Nope, try it.
fins2: mov dx, offset erms18
 call tcrmsg
 ret

fins3: inc numtry  ;Increment number of tries.
 mov argblk, 0 ;Packet number zero.
 mov argbk1, 1 ;One piece of data.
 mov bx, offset data
 mov ax, temp ;Get the generic command.
 mov [bx], ah ;Finish running Kermit.
 mov ah, 'G'  ;Generic command packet.
 call spack
  jmp fins2 ;Tell user and die.
 call rpack  ;Get ACK.
  jmp fins1  ;Go try again.
 cmp ah, 'Y'  ;Got an ACK?
 jnz fins4
 ret   ;Yes, then we're done.
fins4: cmp ah, 'E'  ;Error packet?
 jnz fins1  ;Try sending it again.
 call error1
 ret

; Packet routines

; Send_Packet
; This routine assembles a packet from the arguments given and sends it
; to the host.
;
; Expects the following:
; AH     - Type of packet (D,Y,N,S,R,E,F,Z,T)
; ARGBLK - Packet sequence number
; ARGBK1 - Number of data characters
;
; Returns: +1 always

spack: push ax  ;Save the packet type.
 mov bx, offset packet ;Get address of the send packet.
 mov ah, soh  ;Get the start of header char.
 mov [bx], ah ;Put in the packet.
 inc bx  ;Point to next char.
 mov ax, argbk1 ;Get the number of data chars.
 xchg ah, al
 add ah, ' '+3 ;Real packet character count made printable.
 mov [bx], ah ;Put in the packet.
 inc bx  ;Point to next char.
 mov cl, ah  ;Start the checksum.
 mov ax, argblk ;Get the packet number.
 xchg ah, al
 add ah, ' '  ;Add a space so the number is printable.
 mov [bx], ah ;Put in the packet.
 inc bx  ;Point to next char.
 add cl, ah  ;Add the packet number to the checksum.
 pop ax  ;Get the packet type.
 mov [bx], ah ;Put in the packet.
 inc bx  ;Point to next char.
 add cl, ah  ;Add the type to the checksum.
 mov dx, argbk1 ;Get the packet size.
spack2: cmp dx, 0  ;Are there any chars of data?
  jz spack3  ; No, finish up.
 dec dx  ;Decrement the char count.
 mov ah, [bx] ;Get the next char.
 inc bx  ;Point to next char.
 add cl, ah  ;Add the char to the checksum.
 jmp spack2  ;Go try again.
spack3:
sp3x: mov ah, cl  ;Get the character total.
 mov ch, cl  ;Save here too (need 'cl' for shift).
 and ah, 0C0H ;Turn off all but the two high order bits.
 mov cl, 6
 shr ah, cl  ;Shift them into the low order position.
 mov cl, ch
 add ah, cl  ;Add it to the old bits.
 and ah, 3FH  ;Turn off the two high order bits.  (MOD 64)
 add ah, ' '  ;Add a space so the number is printable.
 mov [bx], ah ;Put in the packet.
 inc bx  ;Point to next char.
 mov ah, seol ;Get the EOL the other host wants.
 mov [bx], ah ;Put in the packet.
 inc bx  ;Point to next char.
 mov ah, 0  ;Get a null.
 mov [bx], ah ;Put in the packet.
 cmp debug, 0 ;debug mode.
 je spack4
 inc bx
 mov ah, '$'
 mov [bx], ah
 mov dx, offset scrsp ;Print string to move cursor.
 call poscur      ;[30c] begin
 call clreol  ;Clear current line
 mov dl, lf  ;  and next one
 call bout
 call clreol
 mov dx, offset scrsp ;Print string to move cursor.
 call poscur      ;[30c] end
 mov dx, offset spmes
 call tmsg
 mov dx, offset packet
 call tmsg  ;Debug end.
spack4: call outpkt  ;Call the system dependent routine.
 jmp rskp


; Write out a packet.

outpkt: mov dh, spad ;Get the number of padding chars.
outpk2: dec dh
 cmp dh, 0
 jl outpk3  ;If none left proceed.
 mov al, spadch ;Get the padding char.
 call prtout  ;Output it.
 jmp outpk2
outpk3: mov bx, offset packet ;Point to the packet.
outlup: mov al, [bx] ;Get the next character.
 cmp al, 0  ;Is it a null?
 jnz outlp2
 ret
outlp2: call prtout  ;Output the character.
 inc bx  ;Increment the char pointer.
 jmp outlup


; Receive_Packet
; This routine waits for a packet arrive from the host.

rpack: call inpkt  ;Read up to a carriage return.
  jmp rptimo  ; User timed us out.
rpack0: call getchr  ;Get a character.
  jmp rpack  ; Hit the carriage return, go try again.
 cmp ah, soh  ;Is the char the start of header char?
  jne rpack0  ; No, go until it is.
rpack1: call getchr  ;Get a character.
  jmp r  ; Hit the carriage return, return bad.
 cmp ah, soh  ;Is the char the start of header char?
  jz rpack1  ; Yes, then go start over.
 mov cl, ah  ;Start the checksum.
 sub ah, ' '+3 ;Get the real data count.
 mov dh, ah  ;Save it for later.
 mov al, ah  ;Swap halves.
 mov ah, 0
 mov argbk1, ax ;Save the data count.
 call getchr  ;Get a character.
  jmp r  ; Hit the carriage return, return bad.
 cmp ah, soh  ;Is the char the start of header char?
  jz rpack1  ; Yes, then go start over.
 add cl, ah  ;Add it to the checksum.
 sub ah, ' '  ;Get the real packet number.
 mov al, ah  ;Swap halves.
 mov ah, 0
 mov argblk, ax ;Save the packet number.
 call getchr  ;Get a character.
  jmp r  ; Hit the carriage return, return bad.
 cmp ah, soh  ;Is the char the start of header char?
  jz rpack1  ; Yes, then go start over.
 mov temp, ax ;Save the message type.
 ; CGL mod for VME packet echo
 cmp ah, packet + 3       ; compare with the type of this received one
 je rpack           ; if the same go back and get next
 ; end of CGL mod
 add cl, ah  ;Add it to the checksum.
 mov bx, offset data ;Point to the data buffer.
rpack2: dec dh  ;Any data characters?
  js rpack3  ; If not go get the checksum.
 call getchr  ;Get a character.
  jmp r  ; Hit the carriage return, return bad.
 cmp ah, soh  ;Is the char the start of header char?
  jz rpack1  ; Yes, then go start over.
 mov [bx], ah ;Put the char into the packet.
 inc bx  ;Point to the next character.
 add cl, ah  ;Add it to the checksum.
 jmp rpack2  ;Go get another.
rpack3: call getchr  ;Get a character.
  jmp r  ; Hit the carriage return, return bad.
 cmp ah, soh  ;Is the char the start of header char?
  jz rpack1  ; Yes, then go start over.
 sub ah, ' '  ;Turn the char back into a number.
 mov dh, cl  ;Get the character total.
 and dh, 0C0H ;Turn off all but the two high order bits.
 mov ch, cl
 mov cl, 6
 shr dh, cl  ;Shift them into the low order position.
 mov cl, ch
 add dh, cl  ;Add it to the old bits.
 and dh, 3FH  ;Turn off the two high order bits.  (MOD 64)
 cmp dh, ah  ;Are they equal?
  jz rpack4  ; If so finish up.
 call cfibf  ;Clear out any other characters on the line.
 ret   ;And return failure.

rpack4: mov ah, 0
 mov [bx], ah ;Put a null at the end of the data.
 mov ax, temp ;Get the type.
 call cfibf  ;Clear out any other characters on the line.
 jmp rskp

rptimo: call cfibf  ;On a time out clear out any remaining chars.
 ret

inpkt: mov bx, offset recpkt ;Point to the beginning of the packet.
 mov incnt, 0
inpkt2: mov al, stime ;[19g] set up timeout loop.
 mov tickct, al ;[19g]
 mov ax, tickst ;[19g] "magic" number loops/tick
 mov ticklp, ax ;[19g]
inpkta: cmp tmrflg, 0 ;Is timeout disabled?   ;[21a]
 je inpktb  ;  If so, skip tick routine  ;[21a]
 dec ticklp  ;[19g]
 cmp ticklp, 0 ;[19g] done this tick?
 jne inpktb  ;[19g] not yet
 mov ax, tickst ;[19g] reload loop count
 mov ticklp, ax ;[19g]
 call ticmsg  ;[19g] beep for debugging
 dec tickct  ;[19g]
 cmp tickct, 0 ;[19g] timed-out?
 jne inpktb  ;[19g] not yet
 call tmomsg  ;[19g] alert user
 jmp inpkt9  ;[19g] go time-out
inpktb: push bx  ;[19g][12] bx gets trashed by kb status check.
 call kabort  ;[19g] Doesn't return if user aborted.
 pop bx  ;[19g]
 call instat  ;Any char there?
  jmp inpkta  ; Go until there is one.
 call inchr  ;Get the character.
 mov [bx], al ;Put the char in the packet.
 inc bx
 inc incnt
 cmp incnt, length recpkt ;Have we overrun the input buffer? ;[29d]
 jb inpktc
 jmp inpkt  ;If so, just clear and restart
inpktc: cmp al, reol ;Is it the EOL char?  ;[29d] end
 jne inpkt2  ;If not loop for another.
 cmp incnt, 1 ;Ignore bare CR.
 jne inpkt6
 jmp  inpkt
inpkt6: cmp ibmflg, 0 ;Is this the (dumb) IBM mainframe?
 jz inpkt4  ;If not then proceed.
inpkt5: cmp state, 'S' ;Check if this is the Send-Init packet.
 jz inpkt4  ;If so don't wait for the XON.
inpkt3: call instat  ;Wait for the turn around char.
  jmp inpkt3
 call inchr
 cmp al, xon  ;Is it the IBM turn around character?
 jne inpkt3  ;If not, go until it is.
inpkt4: cmp debug, 0
 jz inpkt7  ;If not debugging don't print the packet.
 mov al, '$'  ;Get a dollar sign.
 mov [bx], al ;Put in the packet.
 inc bx  ;Point to next char.
 mov dx, offset scrrp ;Print the packet.
 call poscur      ;[30c] begin
 call clreol  ;Clear current line
 mov dl, lf  ;  and next one
 call bout
 call clreol
 mov dx, offset scrrp ;Print string to move cursor.
 call poscur      ;[30c] end
 mov dx, offset rpmes
 call tmsg
 mov dx, offset recpkt
 call tmsg

inpkt7: mov bx, offset recpkt
 mov pktptr, bx ;Save the packet pointer.
 call tmoclr  ;[19g] Clear timeout message
 jmp rskp  ;If so we are done.

inpkt9: ret   ;return failure on time out.


getchr: push bx
 mov bx, pktptr ;Get the packet pointer.
 mov ah, [bx] ;Get the char.
 inc bx
 mov pktptr, bx
 pop bx  ;Restore BX.
 cmp ah, reol ;Is it the EOL char?
 jne getcr2  ;If not return retskp.
 ret   ;If so return failure.
getcr2: jmp rskp


;This is where we go if we get an error packet.  A call to ERROR
; positions the cursor and prints the message.  A call to ERROR1
; just prints a CRLF and then the message.

error: mov state, 'A' ;Set the state to abort.
 mov dx, offset screrr
 call poscur      ;[30c]
 jmp error2
error1: call tcrlf
error2: mov bx, offset data ;Get to the string.
 add bx, argbk1 ;Add the length of the data.
 mov ah, '$'  ;Put a dollar sign at the end.
 mov [bx], ah
 mov dx, offset data ;Print the error message.
 call tmsg
 ret

; Jump here if we die during a transfer.  Print the error message in
; DX and abort.

fatal: push dx  ;Save the error message.
 mov dx, offset screrr
 call poscur      ;[30c]
 pop dx
 call tmsg
 jmp abort  ;Change the state to abort.

; Print the status message in DX, ring the bell and position of the prompt.

fnstat: push dx
 mov dx, offset scrst ;Print string to move cursor.
 call poscur      ;[30c]
 pop dx
 call tmsg
 mov dx, offset ender ;Ring them bells.
 call tmsg
 mov dx, offset scrhlp ;[19f] Cursor position
 call poscur      ;[30c]
 call clreol  ;[19f] Clear help line  ;[30c]
 mov dx, offset scrrpr ;Put cursor back
 call poscur      ;[30c]
 ret


; This routine sets up the data for init packet (either the
; Send_init or ACK packet).

rpar: mov ah, rpsiz ;Get the receive packet size.
 add ah, ' '  ;Add a space to make it printable.
 mov [bx], ah ;Put it in the packet.
 mov ah, rtime ;Get the receive packet time out.
 add ah, ' '  ;Add a space.
 mov 1[bx], ah ;Put it in the packet.
 mov ah, rpad ;Get the number of padding chars.
 add ah, ' '
 mov 2[bx], ah ;Put it in the packet.
 mov ah, rpadch ;Get the padding char.
 add ah, 100O ;Uncontrol it.
 and ah, 7FH
 mov 3[bx], ah ;Put it in the packet.
 mov ah, reol ;Get the EOL char.
 add ah, ' '
 mov 4[bx], ah ;Put it in the packet.
 mov ah, rquote ;Get the quote char.
 mov 5[bx], ah ;Put it in the packet.
 mov ah, ebquot ;Get 8th-bit quote char ;[29g] begin
 mov 6[bx], ah ;Put it in the packet.
 mov ah, '1'  ;Set single character check type
 mov 7[bx], ah ;Put it in the packet.
 mov ah, ' '  ;Set no repeat prefix
 mov 8[bx], ah ;Put it in the packet.
 mov ah, 0  ;Initialize capability byte
 cmp tmrflg, 0 ;Are we able to time out?
 je rpar1  ;  No, leave bit set to zero
 or ah, 20h  ;  Otherwise set timeout capability flag
rpar1: add ah, ' '  ;Add space to make it printable
 mov 9[bx], ah ;Put it in the packet.
 mov ah, 10  ;Ten pieces of data.  ;[29g] end
 ret

; This routine reads in all the send_init packet information.

spar: push cx  ;Save CX.
 mov cx, ax  ;Save the number of arguments.
 mov ah, [bx] ;Get the max packet size.
 sub ah, ' '  ;Subtract a space.
 mov spsiz, ah ;Save it.
 mov ax, cx  ;[19g]
 cmp al, 2  ;[19g] Fewer than two pieces?
 jge spar1  ;[19g]    ;[29g]
 jmp sparx1      ;[29g]
spar1: mov ah, 1[bx] ;[19g] Get the timeout value
 sub ah, ' '  ;[19g]
 mov stime, ah ;[19g] save it.
 mov ax, cx
 cmp al, 3  ;Fewer than three pieces?
 jge spar2      ;[29g]
 jmp sparx2      ;[29g]
spar2: mov ah, 2[bx] ;Get the number of padding chars.
 sub ah, ' '
 mov spad, ah
 mov ax, cx
 cmp al, 4  ;Fewer than four pieces?
 jge spar3      ;[29g]
 jmp sparx3      ;[29g]
spar3: mov ah, 3[bx] ;Get the padding char.
 add ah, 100O ;Re-controlify it.
 and ah, 7FH
 mov spadch, ah
 mov ax, cx
 cmp al, 5  ;Fewer than five pieces?
 jge spar4      ;[29g]
 jmp sparx4      ;[29g]
spar4: mov ah, 4[bx] ;Get the EOL char.
 sub ah, ' '
 mov seol, ah
 mov ax, cx
 cmp al, 6  ;Fewer than six pieces?
 jge spar5      ;[29g]
 jmp sparx5      ;[29g]
spar5: mov ah, 5[bx] ;Get the quote char.
 mov squote, ah
 mov ax, cx      ;[29g] begin
 cmp al, 7  ;Fewer than seven pieces?
 jge spar6
 jmp sparx6
spar6: mov ah, 6[bx] ;Get the 8th-bit quote char.
 call doquo  ;Set the quote character.
 jmp sparxx
sparx1: mov stime, dstime ;Default timeout interval
sparx2: mov spad, dspad ;Default number of padding chars
sparx3: mov spadch, dspadc ;Default pad character
sparx4: mov seol, dseol ;Default eol character
sparx5: mov squote, dsquot ;Default send quote character.
sparx6: mov ebquot, 'N' ;No 8th bit quoting.
sparxx: pop cx      ;[29g] end
 ret   ;If so we are done.

; Set 8-bit quote character based on my capabilities  ;[29g] begin
; and the other Kermit's request.

doquo: cmp ebquot,'N' ;Can I do 8-bit quoting at all?
 je dq2  ;No - so forget it.
 cmp ebquot,'Y' ;Can I do it if requested?
 jne dq0  ;No - it's a must that I do it.
 mov ebquot,ah ;Do whatever he wants.
 jmp dq2
dq0: cmp ah,'Y'  ;I need quoting - can he do it?
 je dq2  ;Yes - then all is settled.
 cmp ah,'N'  ;No - then don't quote.
 je dq1
 cmp ah,ebquot ;Both need quoting - chars must match.
 je dq2
 mov ah,'N'
dq1: mov ebquot,ah
dq2: mov ah,ebquot
 cmp ah,rquote ;Same prefix?
 je dq3  ;Not allowed, so don't do quoting.
 cmp ah,squote ;Same prefix here?
 je dq3  ;This is illegal too.
 ret
dq3: mov ebquot,'N' ;Quoting will not be done.
 ret       ;[29g] end

; These are some utility routines.

; Increment the packet number.

incpkt: inc ax  ;Increment it.
 and ax, 3FH  ;Turn off the two high order bits.
 mov pktnum, ax ;Save modulo 64 of the number.
 inc numpkt  ;Increment the number of packets.
 ret

; Check if the packet number is the present packet.

chkpeq: mov ax, argblk ;Get the packet number.
 cmp ax, pktnum ;Is it the right packet number?
 je chkpe2
 ret   ;No.
chkpe2: jmp rskp  ;Yes.

; Is the packet number one more than present.

chkpom: mov ax, pktnum ;Get the present packet number.
 inc ax  ;Increment.
 and ax, 03FH ;Account for wraparound.
 cmp ax, argblk ;Is the packet's number one more than now?
 jz chkpm2  ;Yes, success.
 ret
chkpm2: jmp rskp

; Check if the packet number is the previous packet.

chkpol: inc oldtry  ;Save the updated number of tries.
 mov ax, pktnum ;Get the present packet number.
 cmp ax, 0  ;Had we wrapped around?
 jne chkpl2
 mov ax, 64
chkpl2: dec ax  ;Decrement.
 cmp ax, argblk ;Is the packet's number one less than now?
 je chkpl3
 jmp rskp
chkpl3: ret

; Abort

abort: mov argblk, 0 ;packet number 0  ;[29a] begin
 mov argbk1, 0 ;no data
 mov ah, 'E'  ;error type
 call spack
  jmp $       ;[29a] end
 mov state, 'A' ;Otherwise abort.
 ret

; ACK the packet.

uupack: call updat  ;[19f] entry which doesn't zero argbk1
 jmp ack1  ;[19f]
upack: call updat  ;Update the number of tries.
ack: mov argbk1, 0 ;No data.  (Packet number already in argblk).
ack1: mov ah, 'Y'  ;Acknowledge packet.
 call spack  ;Send the packet.
  jmp r
 jmp rskp

updat: mov ah, numtry ;Get the number of tries.
 mov oldtry, ah ;Save it.
 mov numtry, 0 ;Reset the number of tries.
 ret

; Re-ACK the previous packet.

reack: call nretry  ;Increment and print the number of retries.
 mov numtry, 0 ;Reset the number of tries.
 mov ah, 'Y'  ;Acknowledge packet.
 call spack  ;Send the packet.
  jmp r
 jmp rskp

; NAK that packet.

nak: mov ax, pktnum ;Get the packet number we're waiting for.
 mov argblk, ax
 mov argbk1, 0
 mov ah, 'N'  ;NAK that packet.
 call spack
  jmp abort
 call nretry  ;Increment and print the number of retries.
 ret   ;Go around again.

; Print the number of retries.

nretry: inc numrtr  ;Increment the number of retries.
pretry: mov dx, offset scrnrt
 call poscur      ;[30c]
 mov ax, numrtr
 call nout  ;Write the number of retries.
 ret

; Print the number of packets.

pnmpkt: mov dx, offset scrnp ;Print string to move cursor.
 call poscur      ;[30c]
 mov ax, numpkt
 call nout  ;Write the number of packets.
 ret

; This routine prints the number in AX on the screen.

nout: push ax  ;save all registers  ;[14] begin
 push bx
 push cx
 push dx
 mov cx, 0  ;number of digits to print
 mov bx, 10  ;radix to use for dividing
nout1: mov dx, 0  ;clear high word of dividend
 div bx  ;divide dx:ax by 10
 push dx  ;push this remainder
 inc cx  ;count it
 cmp ax, 0  ;anything left in the quotient?
 jne nout1  ;   if so, keep dividing
nout2: pop dx  ;get a digit
 add dl, '0'  ;make it ascii
 push cx  ;save our count
 call bout  ;print the digit
 pop cx  ;repeat until all digits printed
 loop nout2
 pop dx  ;restore all registers
 pop cx
 pop bx
 pop ax
 ret

; Initialize file buffers and paint screen.

init:
 call dspver  ;Clear screen and display version header
 mov dx, offset scrnp ;Position to packet location
 call poscur
 mov dx, offset pktlin      ;[20a]
 call tmsg
 mov dx, offset scrhlp ;[19f] Cursor position
 call poscur  ;[19f] for help line   ;[30c]
 call revon  ;Bottom line reverse   ;[30c]
 mov dx, offset infm10 ;[19f] Help for file transfer
 call tmsg  ;[19f]
 call revoff       ;[30c]

init1: mov chrcnt, bufsiz ;Number of chars left.
 mov bufpnt, offset dma ;Addr for beginning.
 ret


;  Clear out the old filename on the screen.

clrfln: mov dx, offset scrfr ;Move cursor to file rename. ;[31] begin
 call poscur
 call clreol  ;Clear to EOL.   ;[31] end
 mov dx, offset scrfln ;Move cursor to file name position.
 call poscur      ;[30c]
 call clreol  ;Clear to EOL.   ;[30c]
 ret

; acknowledge ^X/^Z with a message  [19f] start
intmsg: mov dx, offset scrint ;position info
 call poscur  ;output it   ;[30c]
 mov dx, offset infms8 ;File message
 cmp cxzflg, 'X' ;but first check
 je intm01  ;yes it was X
 mov dx, offset infms9 ;no it was 'Z' - file group.
 cmp cxzflg, 'Z' ;or was it?
 je intm01  ;yes - go output
 call clreol  ;anything else - clear line ;[30c]
 jmps intm02      ;[30c]
intm01: call tmsg  ;output it
intm02: ret   ;goodbye [19f] end

; let the time-out clock "tick" ;[19g] start
ticmsg: mov dl, bell ;output a ...
 call dbout  ;... beep!
 ret

; notify of time-out
tmomsg: mov dx, offset scrst ;cursor position
 call poscur      ;[30c]
 mov dx, offset timoms ;timeout message
 call tmsg
 mov tmodon, 1 ;flag for message
 ret

; clear time-out message
tmoclr: cmp tmodon, 0 ;message on screen?
 jne tmocl1  ;yes - go get it
 ret   ;nothing to clear - return
tmocl1: mov dx, offset scrst ;cursor position
 call poscur      ;[30c]
 call clreol  ;clear line   ;[30c]
 mov tmodon, 0 ;indicate line is clear
 ret   ;[19g] end

; RECEIVE command

read: call init  ;Paint the screen and initialize file buffers.
 call cfibf  ;Clear out any stacked NAKs.
read1: mov numpkt, 0 ;Set the number of packets to zero.
 mov numrtr, 0 ;Set the number of retries to zero.
 mov pktnum, 0 ;Set the packet number to zero.
 mov numtry, 0 ;Set the number of tries to zero.
 mov cxzflg, 0 ;[19f] reset ^X/^Z flag
 call pretry
 mov state, 'R' ;Set the state to receive initiate.
read2: call pnmpkt
 mov ah, state ;Get the state.
 cmp ah, 'D'  ;Are we in the data send state?
 jne read3
 call rdata
 jmp read2
read3: cmp ah, 'F'  ;Are we in the file receive state?
 jne read4
 call rfile  ;Call receive file.
 jmp read2
read4: cmp ah, 'R'  ;Are we in the receive initiate state?
 jne read5
 call rinit
 jmp read2
read5: cmp ah, 'C'  ;Are we in the receive complete state?
 jne read6
 mov dx, offset infms3 ;Plus a little cuteness.
 cmp cxzflg,0 ;[19f] an interruption?
 je read59  ;[19f] no - do normal thing
 mov dx, offset infms7 ;[19f] substitute 'interrupted' message.
read59: call fnstat
 ret
read6: mov dx, offset infms4 ;Plus a little cuteness.
 call fnstat
 ret


; Receive routines

; Receive init

rinit: mov ah, numtry ;Get the number of tries.
 cmp ah, imxtry ;Have we reached the maximum number of tries?
 jl rinit2
 mov dx, offset ermes7 ;Print this error and die.
 jmp fatal

rinit2: inc ah  ;Increment it.
 mov numtry, ah ;Save the updated number of tries.
 call rpack  ;Get a packet.
  jmp nak  ; Trashed packet: nak, retry.
 cmp ah, 'S'  ;Is it a send initiate packet?
 jne rinit3  ;If not see if its an error.
 mov ebquot, 'Y' ;Initialize my 8th-bit quote flag ;[29g]
 mov ah, numtry ;Get the number of tries.
 mov oldtry, ah ;Save it.
 mov numtry, 0 ;Reset the number of tries.
 mov ax, argblk ;Returned packet number.  (Synchronize them.)
 call incpkt  ;Increment the packet number.
 mov ax, argbk1 ;Get the number of arguments received.
 mov bx, offset data ;Get a pointer to the data.
 call spar  ;Get the data into the proper variables.
 mov bx, offset data ;Get a pointer to our data block.
 call rpar  ;Set up the receive parameters.
 xchg ah, al
 mov ah, 0
 mov argbk1, ax ;Store the returned number of arguments.
 call ack1  ;ACK the packet.
  jmp abort
 mov ah, 'F'  ;Set the state to file send.
 mov state, ah
 ret
rinit3: cmp ah, 'E'  ;Is it an error packet?
 jne rinit4
 call error
rinit4: jmp abort


; Receive file

rfile: cmp numtry, maxtry ;Have we reached the maximum number of tries?
 jl rfile1
 mov dx, offset ermes8 ;Print this error and die.
 jmp fatal

rfile1: inc numtry  ;Save the updated number of tries.
 call rpack  ;Get a packet.
  jmp nak  ; Trashed packet: nak, retry.

 cmp ah, 'S'  ;Is it a send initiate packet?
 jne rfile2  ; No, try next type.
 cmp oldtry, imxtry ;Have we reached the maximum number of tries?
 jl rfil12  ;If not proceed.
 mov dx, offset ermes7 ;Print this error and die.
 jmp fatal
rfil12: call chkpol  ;Check the packet number, is it right?
  jmp nak  ;No, NAK and try again.
 mov bx, offset data ;Get a pointer to our data block.
 call rpar  ;Set up the parameter information.
 xchg ah, al
 mov ah, 0
 mov argbk1, ax ;Save the number of arguments.
 call reack  ;Re-ACK the old packet.
  jmp abort
 ret

rfile2: cmp ah, 'Z'  ;Is it an EOF packet?
 jne rfile3  ; No, try next type.
 cmp oldtry, maxtry ;Have we reached the maximum number of tries?
 jl rfil21  ;If not proceed.
 mov dx, offset ermes9 ;Print this error and die.
 jmp fatal
rfil21: call chkpol  ;Check the packet number, is it right?
  jmp nak  ;No, NAK and try again.
 mov argbk1, 0 ;No data.
 call reack  ;Re-ACK the previous packet
  jmp abort
 ret

rfile3: cmp ah, 'F'  ;Start of file?
 jne rfile4
 call chkpeq  ;Packet numbers equal?
  jmp nak  ; No, NAK it and try again.
 call incpkt  ;Increment the number of packets.
 call gofil  ;Get a file to write to.
  jmp abort
 call init1  ;Initialize all the file buffers.
 call upack  ;Update counters and ACK the packet.
  jmp abort
 mov state, 'D' ;Set the state to data receive.
 ret

rfile4: cmp ah, 'B'  ;End of transmission?
 jne rfile5
 call chkpeq  ;Packet numbers equal?
  jmp nak  ; No, NAK it and try again.
 call ack  ;ACK the packet.
  jmp abort
 mov state, 'C' ;Set the state to complete.
 ret

rfile5: cmp ah, 'E'  ;Is it an error packet?
 jne rfile6
 call error
rfile6: jmp abort


; Receive data

rdata: cmp numtry, maxtry ;Get the number of tries.
 jl rdata1
 mov dx, offset erms10 ;Print this error and die.
 jmp fatal

rdata1: inc numtry  ;Save the updated number of tries.
 call rpack  ;Get a packet.
  jmp nak  ; Trashed packet: nak, retry.

 cmp ah, 'D'  ;Is it a data packet?
 je rdat11
 jmp rdata2  ; No, try next type.
rdat11: call chkpeq  ;Packet numbers equal?
  jmp rdat12  ; No, check if previous packet.
 call incpkt  ;Increment the number of packets.
 mov ax, argbk1 ;Get the length of the data.
 cmp cxzflg, 0 ;[19f] interrupt requested?
 jne rdat1a  ;[19f] yes - skip put to file.
 call ptchr
  jmp abort  ; Unable to write out chars;abort.
 call upack  ;ACK the packet.
  jmp abort
 ret
rdat1a: mov bx, offset data ;[19f] data location
 mov ah, cxzflg ;[19f] get the ^X/^Z flag
 mov [bx], ah ;[19f] stick it in the packet
 mov argbk1, 1 ;[19f] data length is 1
 call uupack  ;[19f] ACK the packet (without zeroing argbk1)
  jmp abort  ;[19f]
 ret   ;[19f]

rdat12: cmp oldtry, maxtry ;Have we reached the maximum number of tries?
 jl rdat13  ;If not proceed.
 mov dx, offset erms10 ;Print this error and die.
 jmp fatal
rdat13: call chkpol  ;Check the packet number, is it right?
  jmp nak  ;No, NAK it and try again.
 mov argbk1, 0 ;No data.
 call reack  ;Re-ACK the previous packet.
  jmp abort
 ret

rdata2: cmp ah, 'F'  ;Start of file?
 jne rdata3  ; No, try next type.
 cmp oldtry, maxtry ;Have we reached the maximum number of tries?
 jl rdat21  ;If not proceed.
 mov dx, offset ermes8 ;Print this error and die.
 jmp fatal
rdat21: call chkpol  ;Check the packet number, is it right?
  jmp nak  ; No, NAK it and try again.
 mov argbk1, 0 ;No data.
 call reack  ;Re-ACK the previous packet
  jmp abort
 ret

rdata3: cmp ah, 'Z'  ;Is it a EOF packet?
 je rdat32
 jmp rdata4  ;Try and see if its an error.
rdat32: call chkpeq  ;Packet numbers equal?
  jmp nak  ; No, NAK it and try again.
 call incpkt  ;Increment the packet number.
 cmp cxzflg, 0 ;This file interrupted? [19f] start
 jne rdat3a  ;yes jump
 cmp argbk1, 1 ;1 byte of data in EOF packet?
 jmp rdat3b  ;no - finish up file
 mov bx, offset data ;pointer to data
 mov ah, [bx] ;get the data
 cmp ah, 'D'  ;is it D as in Discard?
 jne rdat3b  ;no - finish writing file
rdat3a: mov dx, offset fcb ;get file's fcb
 call delete  ;delete the file.
 cmp cxzflg, 'X' ;Kill one file or batch?
 jne rdat37  ;whole batch - leave flag
 mov cxzflg, 0 ;clear flag
 call intmsg  ;clear message
 jmp rdat37  ;go to clean up.  [19f] end
rdat3b: mov bx, bufpnt ;Get the dma pointer.
 mov ax, 80H
 sub ax, chrcnt ;Get the number of chars left in the DMA.
 cmp ax, 80H
 jne rdat34
 call outbuf  ;Write out buffer if no room for ^Z.
  jmp abort
 jmp rdat36  ;Go close the file.
rdat34: mov cl, 'Z'-100O ;Put in a ^Z for EOF.
 mov [bx], cl
 inc ax
 dec chrcnt
 mov cx, chrcnt
 mov temp, cx
 inc bx
rdt3: inc ax
 cmp ax, 80H
 jg rdat35  ;Pad till full.
 mov cl, 1AH  ;Use control-Z's  ;[13]
 mov [bx], cl
 inc bx
 jmp rdt3
rdat35: call outbuf  ;Output the last buffer.
  jmp abort  ; Give up if the disk is full.
rdat36: mov dx, offset fcb
 call closf  ;Close up the file.
rdat37: call upack  ;ACK the packet.
  jmp abort
 mov state, 'F'
 ret

rdata4: cmp ah, 'E'  ;Is it an error packet.
 jne rdata5
 call error
rdata5: jmp abort


; Send a file.

send: cmp wldflg,0FFh
 je send12
 mov dircnt,0 ;If not wild, just use the name in the FCB
 mov dindex,0
 call getopn  ;Open the file
 jmps send19
send12: call getwld  ;If wild, get sorted list of matching names
  jmp r  ;  on error, message already printed
 mov dindex,0 ;Start at first one
 call getfil  ;Get and open first file
  jmp r
send19: call init  ;Paint the screen and initialize file buffers.
 call cfibf  ;Clear out any stacked NAKs.
 mov pktnum, 0 ;Set the packet number to zero.
 mov numtry, 0 ;Set the number of tries to zero.
 mov numpkt, 0 ;Set the number of packets to zero.
 mov numrtr, 0 ;Set the number of retries to zero.
 call pretry  ;Print the number of retries.
 mov state,'S' ;Set the state to receive initiate.
send2: call pnmpkt  ;Print the number of packets.
 cmp state, 'S' ;Are we in the send initiate state?
 jne send3
 call sinit
 jmp send2
send3: cmp state, 'F' ;Are we in the file send state?
 jne send4
 call sfile  ;Call send file.
 jmp send2
send4: cmp state, 'D' ;Are we in the data send state?
 jne send5
 call sdata
 jmp send2
send5: cmp state, 'Z' ;Are we in the EOF state?
 jne send6
 call seof
 jmp send2
send6: cmp state, 'B' ;Are we in the eot state?
 jne send7
 call seot
 jmp send2
send7: cmp state, 'C' ;Are we in the send complete state?
 jne send8
 mov dx, offset infms3 ;Plus a little cuteness.
 cmp cxzflg, 0 ;[19f] Interrupted?
 je send7a  ;[19f] no
 mov dx, offset infms7 ;[19f] substitute "interrupted" message
send7a: call fnstat
 ret
send8: mov dx, offset infms4 ;Plus a little cuteness.
 call fnstat
 ret


; Send routines

; Send initiate


sinit: cmp numtry, imxtry ;Have we reached the maximum number of tries?
 jl sinit2
 mov dx, offset erms14
 jmp fatal
sinit2: mov ah, 'Y'  ;Reset our quote capability ;[29g] begin
 cmp parflg, parnon ;If we have parity,
 je sini21  ;  send our quote preference
 mov ah, dqbin
sini21: mov ebquot, ah ;Set our quote capability ;[29g] end
 inc numtry  ;Save the updated number of tries.
 mov bx, offset data ;Get a pointer to our data block.
 call rpar  ;Set up the parameter information.
 xchg ah, al
 mov ah, 0
 mov argbk1, ax ;Save the number of arguments.
 mov ax, numpkt ;Get the packet number.
 mov argblk, ax
 mov ah, 'S'  ;Send initiate packet.
 call spack  ;Send the packet.
  jmp abort
 call rpack  ;Get a packet.
  jmp r  ; Trashed packet don't change state, retry.
 cmp ah, 'Y'  ;ACK?
 jne sinit3  ;If not try next.
 call chkpeq  ;Is it the right packet number?
  jmp nretry  ;Increment the retries and go try again.
 call incpkt  ;Increment the packet number.
 mov ax, argbk1 ;Get the number of pieces of data.
 mov bx, offset data ;Pointer to the data.
 call spar  ;Read in the data.
 mov ah, numtry ;Get the number of tries.
 mov oldtry, ah ;Save it.
 mov numtry, 0 ;Reset the number of tries.
 mov state, 'F' ;Set the state to file send.
 ret

sinit3: cmp ah, 'N'  ;NAK?
 jne sinit4  ;If not see if its an error.
 call nretry
 ret

sinit4: cmp ah, 'E'  ;Is it an error packet?
 jne sinit5
 call error
sinit5: jmp abort


; Send file header

sfile: cmp numtry, maxtry ;Have we reached the maximum number of tries?
 jl sfile1
 mov dx, offset erms14
 jmp fatal
sfile1: inc numtry  ;Increment it.
 mov cxzflg, 0 ;[19f] clear ^X/^Z flag
 push ds
 pop es
 mov di, offset data ;Get a pointer to our data block.
 mov si, offset fcb+1 ;Pointer to file name in FCB.
 mov cx,11
sfil11: cmp cx,3  ;Separate file type with period
 jne sfil12
 mov al,'.'
 stosb
sfil12: lodsb
 and al,7Fh  ;Strip off attribute bits
 cmp al,' '  ;Printable, nonspace characters only
 jbe sfil13
 cmp al,7Fh
 jae sfil13
 stosb
sfil13: loop sfil11
 mov byte ptr [di],'$' ;Terminate filename for printing
 sub di, offset data
 mov argbk1, di ;Save number of characters in name
 call clrfln
 mov dx, offset data ;Print file name.
 call tmsg

 mov ax, pktnum ;Get the packet number.
 mov argblk, ax
 mov ah, 'F'  ;File header packet.
 call spack  ;Send the packet.
  jmp abort
 call rpack  ;Get a packet.
  jmp r  ; Trashed packet don't change state, retry.
 cmp ah, 'Y'  ;ACK?
 jne sfile2  ;If not try next.
 call chkpeq  ;Packet number right.
  jmp nretry  ;Increment the retries and go try again.
sfil14: call incpkt  ;Increment the packet number.
 call updat  ;Update the number of tries.

sfil15: mov byte ptr fcb+20h,0 ;Set the record number to zero.
 mov eoflag, 0 ;Indicate not EOF.
 mov filflg, 0FFh ;Indicate file buffer empty.
 call gtchr
  jmp sfil16  ;Error go see if its EOF.
 jmp sfil18  ;Got the chars, proceed.
sfil16: cmp ah, 0FFH ;Is it EOF?
 je sfil17
 jmp abort  ;If not give up.
sfil17: mov state, 'Z' ;Set the state to EOF.
 ret
sfil18: mov siz, ax
 mov state, 'D' ;Set the state to data send.
 ret

sfile2: cmp ah, 'N'  ;NAK?
 jne sfile3  ;Try if error packet.
 call chkpom  ;Is the packet's number one more than now?
  jmp nretry  ;Increment the retries and go try again.
 jmp sfil14  ;If so, join the ACK.

sfile3: cmp ah, 'E'  ;Is it an error packet.
 jne sfile4
 call error
sfile4: jmp abort


; Send data

sdata: cmp cxzflg, 0 ;[19f] Interrupt flag on?
 je sdata0  ;[19f] no
 mov state, 'Z' ;[19f] yes - abort sending file
 ret
sdata0: cmp numtry, maxtry ;Have we reached the maximum number of tries?
 jl sdata1
 mov dx, offset erms14
 jmp fatal
sdata1: inc numtry  ;Increment it.
 mov dx, offset data ;Get a pointer to our data block.
 mov datptr, dx
 mov dx, offset filbuf ;Pointer to chars to be sent.
 mov cbfptr, dx
 mov cx, 1  ;First char.
sdat11: mov bx, cbfptr
 mov ah, [bx]
 inc cbfptr
 mov bx, datptr
 mov [bx], ah ;Put the char in the data packet.
 inc datptr  ;Save position in data packet.
 inc cx  ;Increment the count.
 cmp cx, siz  ;Have we transfered that many?
 jle sdat11  ;If not get another.
 mov ax, siz  ;Number of char in char buffer.
 mov argbk1, ax
 mov ax, pktnum ;Get the packet number.
 mov argblk, ax
 mov ah, 'D'  ;Data packet.
 call spack  ;Send the packet.
  jmp abort
 call rpack  ;Get a packet.
  jmp r  ; Trashed packet don't change state, retry.
 cmp ah, 'Y'  ;ACK?
 jne sdata2  ;If not try next.
 call chkpeq  ;Right packet number?
  jmp nretry  ;Increment the retries and go try again.
sdat12: call incpkt  ;Increment the packet number.
 call updat  ;Update the number of tries.
 cmp argbk1,1 ;1 byte of data there?  [19f] start
 jne sdt12b  ;no - go on
 mov bx, offset data ;pointer to data
 mov ah, [bx] ;get the data
 cmp ah, 'X'  ;an 'X'?
 je sdt12a  ;yes - go
 cmp ah, 'Z'  ;or a 'Z'
 je sdt12a  ;also go
 jmp sdt12b  ;neither one - go on
sdt12a: mov cxzflg, ah ;'X' or 'Z' - set the interrupt flag [19f] end
 ret
sdt12b: call gtchr
  jmp sdat13  ;Error go see if its EOF.
 mov siz, ax  ;Save the size of the data gotten.
 ret

sdat13: cmp ah, 0FFH ;Is it EOF?
 je sdat14
 jmp abort  ;If not give up.

sdat14: mov state, 'Z' ;Set the state to EOF.
 ret
sdata2: cmp ah, 'N'  ;NAK?
 jne sdata3  ;See if is an error packet.
 call chkpom  ;Is the packet's number one more than now?
  jmp nretry  ;Increment the retries and go try again.
 jmp sdat12

sdata3: cmp ah, 'E'  ;Is it an error packet.
 jne sdata4
 call error
sdata4: jmp abort


; Send EOF

seof: cmp numtry, maxtry ;Have we reached the maximum number of tries?
 jl seof1
 mov dx, offset erms14
 jmp fatal
seof1: inc numtry  ;Increment it.
 mov ax, pktnum ;Get the packet number.
 mov argblk, ax
 mov argbk1, 0 ;No data.
 cmp cxzflg, 0 ;[19f] interrupt flag set?
 je seof1a  ;[19f] no - go on
 mov bx, offset data ;[19f] point to data
 mov ah, 'D'  ;[19f] get 'D' as in Discard
 mov [bx], ah ;[19f] stuff it into packet
 mov argbk1, 1 ;[19f] set data length of 1
seof1a: mov ah, 'Z'  ;EOF packet.
 call spack  ;Send the packet.
 jmp abort
 call rpack  ;Get a packet.
  jmp r  ; Trashed packet don't change state, retry.
 cmp ah, 'Y'  ;ACK?
 jne seof2  ;If not try next.
 call chkpeq  ;Is it the right packet number?
  jmp nretry  ;Increment the retries and go try again.
seof12: call incpkt  ;Increment the packet number.
 call updat  ;Update the number of tries.
 mov dx, offset fcb ;Close the file.
 call closf
 call getfil  ;Get and open the next file.
  jmp seof13  ; No more.
 mov state, 'F' ;Set the state to file send.
 cmp cxzflg, 'X' ;[19f] 'X' in interrupt flag?
 mov cxzflg, 0 ;[19f] meantime reset it
 jne sef13a  ;[19f] no - go on
 call intmsg  ;[19f] clear interrupt message
sef13a: ret   ;[19f] goodbye
seof13: mov state, 'B' ;Set the state to EOT.
 ret

seof2: cmp ah, 'N'  ;NAK?
 jne seof3  ;Try and see if its an error packet.
 call chkpom  ;Is the packet's number one more than now?
  jmp nretry  ;Increment the retries and go try again.
 jmp seof12

seof3: cmp ah, 'E'  ;Is it an error packet?
 jne seof4
 call error
seof4: jmp abort


; Send EOT

seot: cmp numtry, maxtry ;Have we reached the maximum number of tries?
 jl seot1
 mov dx, offset erms14
 jmp fatal
seot1: inc numtry  ;Increment it.
 mov ax, pktnum ;Get the packet number.
 mov argblk, ax
 mov argbk1, 0 ;No data.
 mov ah, 'B'  ;EOF packet.
 call spack  ;Send the packet.
  jmp abort
 call rpack  ;Get a packet.
  jmp r  ;Trashed packet don't change state, retry.
 cmp ah, 'Y'  ;ACK?
 jne seot2  ;If not try next.
 call chkpeq  ;Is it the right packet number.
  jmp nretry  ;Increment the retries and go try again.
seot12: call incpkt  ;Increment the packet number.
 call updat  ;Update the number of tries.
 mov state, 'C' ;Set the state to file send.
 ret

seot2: cmp ah, 'N'  ;NAK?
 jne seot3  ;Is it error.
 call chkpom  ;Is the packet's number one more than now?
  jmp nretry  ;Increment the retries and go try again.
 jmp seot12

seot3: cmp ah, 'E'  ;Is it an error packet.
 jne seot4
 call error
seot4: jmp abort